Hindustan Automation

Lift curtain operator

1. With adoption of easy disassembly design, it iseasy to assembleand dissemble themotor.
2. Used for straight curtaintracks.
3. Themotor has been patented on clutch, and the stroke designed to be automaticmanually operated and remote operated.
4. Radio receivercan be made inside or outside of motor, can also be connected with othercontrol systems, easy to make smart control.
5. Minimal noise, minimal vibrate.
6. High quality full coatingtrack, moved by belt with stainless steel wires.

1) Manual startPull curtain about 10cm by hand, curtain will open and close automatically.2) Manual operation if power cut
When there is no power, you can open and close by hand easily.3)Middle position setSet a middle stop location during open and close position for better lighting.4) Multiple controlsRemote control, switch and smart remote control used accordingly.5)Automatically set the memory running pointAfter power of, the motor willset the running point for opening and closing again when power on.6) Customized Track length
DIY design, get any length needed.

1) Tubular Operator is mainly used for roller,honeycomb, venetian &awnings blinds etc..
2) Built in receiver, can realize variety of control functions.3) Mechanical &electronic limit switch, with accurate limit position.4) Flexible control mode: single control, group control and packet control can be achieved. o Over load protectionfunction.5) Easy installation and smooth running, dB level below 38dB.